1、防撞扶手由高分子材料的挤出件、注塑件、防震垫，通过特定规划的型腔结构和铝合金紧配而成

1. The anti-collision armrest is made of polymer extruded parts, injection molded parts, and shock-absorbing pads, which are tightly matched with specific planned cavity structures and aluminum alloys

2、防撞扶手用处装置在医院、福利院、养老院、宾馆等公共设施帮助患者、白叟步行，内芯铝合金规划。

2. The anti-collision handrail is used in public facilities such as hospitals, welfare homes, nursing homes, hotels, etc. to help patients and the elderly walk, with a high-quality aluminum alloy core professionally planned.

公用洗手间的残疾人厕位

Disabled restroom spaces in public restrooms

1)抓杆的直径为32mm40mm，内侧距墙面40mm，抓杆要装置结实，应能接受身体的重量。

1) The diameter of the grab bar is 32mm to 40mm, and the inner side is 40mm away from the wall. The grab bar should be firmly installed and able to withstand the weight of the body.

2)残疾人厕位的门扇应向外开启，门扇开启后通行的净宽度不该小于0.80m，在门扇内侧应设关门拉手。

2) The door leaf of the disabled toilet should be opened outward, and the net width of passage after the door leaf is opened should not be less than 0.80m. A door closing handle should be installed on the inner side of the door leaf.

3)男女洗手间的隔间应设残疾人运用的厕位，厕位面积不该小于2.00mX1.00m或1.60mX1.40m。

3) The compartments of male and female restrooms should be equipped with toilet spaces for people with disabilities, and the area of the toilet space should not be less than 2.00mX1.00m or 1.60mX1.40m.

4)厕为内射高0.475m的坐式便器，在坐便器两边应设高0.70m的水平抓杆和高1.45m的笔直抓杆。

4) The toilet is a seated toilet with a height of 0.475m, and horizontal grab bars with a height of 0.70m and vertical grab bars with a height of 1.45m should be installed on both sides of the toilet.

5)开门执手应采用横执把手，门锁应装置门内外均可运用的门插销。

5) The door handle should use a horizontal handle, and the door lock should be equipped with a door latch that can be used both inside and outside the door.

6)厕位的地面应平整，不光滑，不积水，没有高低差。在厕位内应设高1.20m的挂衣钩。

6) The floor of the toilet should be flat, not smooth, without water accumulation, and without any height difference. A clothes hook with a height of 1.20m should be installed in the toilet seat.