来源: 日期:2024-02-08 发布人:创始人


1、 Introduction to Handrails and Railings


Handrails, also known as guardrails, are devices that people rely on when going up and down stairs, slopes, and other road sections, which can ensure people's safety. Handrails are commonly used as safety facilities in public places, homes, offices, and other places.


2、 Dimensions of handrails and railings

1. 高度:扶手栏杆的高度依赖于使用它的人的身高。一般来说,扶手栏杆的高度应该在900mm~1100mm之间。

1. Height: The height of a railing depends on the height of the person using it. Generally speaking, the height of handrails should be between 900mm and 1100mm.

2. 直径:扶手栏杆的直径通常要求在40mm~60mm之间。

2. Diameter: The diameter of handrails is usually required to be between 40mm and 60mm.

3. 固定底部高度:扶手悬空或者不稳定情况下,需要通过固定底部高度来保证其稳定性。扶手栏杆底部固定高度应该在200mm左右。

3. Fixed bottom height: When the armrest is suspended or unstable, it is necessary to ensure its stability by fixing the bottom height. The fixed height of the bottom of the railing should be around 200mm.

4. 扶手间距:扶手栏杆的间距通常在1.5m~2.5m之间,如果是儿童或者老人频繁使用,则要更加接近1.5m的间距。

4. Handrail spacing: The spacing between handrails is usually between 1.5m and 2.5m. If it is frequently used by children or the elderly, the spacing should be closer to 1.5m.



3、 Materials for handrails and railings


The material of handrails and railings needs to meet various requirements such as comfort, adaptability, and corrosion resistance. The following are commonly used materials for handrails and railings:

1. 钢材:具有良好的强度和稳定性,但需要表面防锈处理。

1. Steel: It has good strength and stability, but requires surface rust prevention treatment.

2. 不锈钢:与钢材类似,但不易生锈,具有优良的抗腐蚀性能。

2. Stainless steel: Similar to steel, but not prone to rusting, it has excellent corrosion resistance.

3. 木材:具有良好的手感和舒适性,但需要经常维护和保养。

3. Wood: It has a good hand feel and comfort, but requires regular maintenance and upkeep.

4. 铝合金:重量轻,易于加工和安装,但承重性能略逊于钢材和不锈钢。

4. Aluminum alloy: lightweight, easy to process and install, but its load-bearing performance is slightly inferior to steel and stainless steel.


4、 Installation requirements for handrails and railings

1. 扶手栏杆的安装必须要保证其牢固和稳定,不能出现松动或者扭曲变形的情况。

The installation of handrails must ensure their firmness and stability, without any looseness or distortion.

2. 扶手栏杆底部固定要采用扎实的方法,如钻孔安装、锚固或者焊接等。

2. The bottom of the handrail should be fixed using solid methods, such as drilling installation, anchoring, or welding.

3. 安装过程中要注意扶手栏杆的高度和间距是否符合要求。

During the installation process, attention should be paid to whether the height and spacing of the handrails meet the requirements.

4. 扶手栏杆的末端应采用把手构造,方便人们在走动时抓住。

4. The end of the handrail should be constructed with handles to facilitate people's grip while walking.

5. 扶手栏杆侧面必须光滑不锋利,以免对人体造成划伤或者损伤。

5. The side of the handrail must be smooth and not sharp to avoid scratching or damage to the human body.

以上的文章由济南lyu乐鱼建材有限公司 济南防护扶手提供分享,更多内容请关注我们:

The above article is shared by Jinan Ningda Building Materials Co., Ltd. Jinan Protective Handrails. For more information, please follow us:






地址:山东省济南市天桥区小清河北路8888号滨河商务中心D栋办公楼601—1室复制链接) 济南lyu乐鱼建材有限公司